BumBuns Clickies

$14.92CAD

Title:

Gyozi the Blue BumBun

Mandu the Green BumBun

Shumi the Pink BumBun

Wonti the Yellow BumBun

Wiggle Intensity:

Wiggle rating pending...

Shipping paused — back soon

Order now — all orders start shipping from 10th August 2026.

Fast Shipping
Made in
Australia
Hand-Finished & Inspected
Secure Checkout

All our models are printed with multiple walls and increased infill using high-quality, non-toxic PLA for maximum strength and safety.
Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal -and make every piece uniquely yours.
Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
Each figurine is carefully packaged with protective packaging to ensure it arrives in perfect condition.
Please inspect your figurine upon arrival. If you have any concerns, contact us before leaving feedback.

Your Wiggly Stuff figures are built to last - with a little TLC!

Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at BumBuns Clickies

Another angle from Wiggly HQ

Quick facts

At a glance

Approximate Product Dimensions (mm)

Option	Length	Width	Height
Gyozi the Blue BumBun	43 mm	43 mm	44 mm
Mandu the Green BumBun	43 mm	43 mm	44 mm
Shumi the Pink BumBun	43 mm	43 mm	44 mm
Wonti the Yellow BumBun	43 mm	43 mm	44 mm

Quality & Process

All our models are printed with multiple walls and increased infill using high-quality, non-toxic PLA for maximum strength and safety.
Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal -and make every piece uniquely yours.
Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
Each figurine is carefully packaged with protective packaging to ensure it arrives in perfect condition.
Please inspect your figurine upon arrival. If you have any concerns, contact us before leaving feedback.

Product Care

Your Wiggly Stuff figures are built to last - with a little TLC!

Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

Safety

We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

The full story

Meet the BumBuns Clickies - tiny dumpling fidgets with round little bums, big cartoon faces, and a satisfying press.

Each BumBun has its own dumpling-inspired shape, colour, and personality, from dreamy little Gyozi to bright, click-happy Wonti. They are cute, pocketable, and just serious enough about showing off their tiny buns.

Built as small clickers with a keychain-ready attachment point, BumBuns are made for bags, keys, lanyards, desk breaks, and anyone who likes their fidgets with a bit of character. Keyring not included.

Choose your favourite BumBun:

Gyozi the Blue BumBun: a calm little gyoza dreamer with soft blue style and quiet clicky confidence.
Mandu the Green BumBun: a cheeky round dumpling who looks like it definitely started something.
Shumi the Pink BumBun: a sweet shumai-inspired softie with proud little buns and big cute energy.
Wonti the Yellow BumBun: a bright wonton buddy with sunny colours and a very eager click.

Want the surprise version? Mystery BumBuns Dumpling Clicker hides one random BumBun under a steamer lid, with mystery colours, gold, rainbow, and an exclusive alien dumpling possible.

Why You'll Love It

Satisfying fidget feel: A clicky little button gives your hands something fun to press during desk breaks, errands, or idle moments.
Character-led collecting: Each colour has its own dumpling-inspired personality, so the variants feel like a tiny crew.
Keychain-ready design: Clip it to keys, bags, or lanyards with your own keyring or attachment.
Cheeky display charm: The round little bum detail makes them funny, cute, and easy to love.
Small gift appeal: A playful pick for fidget fans, dumpling lovers, and anyone who likes cute things with personality.