Skip to content
Skip to product content

Pino the Tree New!

$17.16CAD
  • A happy little tree with a star on top and two sturdy feet
  • Hangs from the top loop or stands on a desk, shelf or windowsill
  • Comes with a gold hanging string

Dispatches in 2-4 business days

  • Fast Shipping

  • Made in
    Australia

  • Hand-Finished & Inspected

  • Secure Checkout

  • We 3D-print our models in PLA, with wall and infill settings suited to each design.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to help protect it in transit.
  • Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Pino the Tree

A finger pressing the gold star on top of Pino the Tree
Another angle from Wiggly HQ

The full story

Meet Pino - a little tree who walked in from the garden for Christmas.

Pino decided he did not want to spend December outside, so he walked in through the back door and wiped his feet very politely. He has been standing in the corner of the lounge room ever since, looking festive.

With a star on top, a happy little face and two sturdy feet, Pino hangs from the little loop on the tree, or stands on a desk, shelf or windowsill, and brings a bit of Christmas wherever he is put.

He looks right at home beside the dressed-up peas in our Christmas tree decorations.

Why You'll Love Pino

  • A tree with feet: A cheerful little Christmas tree character who stands on his own.
  • Hangs or stands: Hang him from the loop on the tree, or stand him on a desk, shelf or windowsill.
  • A gift for tree lovers: For the person who can never have too many Christmas trees.
  • Pairs with the pea pod: Pino looks right at home beside the dressed-up Christmas peas.

What You Get

  • 1 x Pino the Tree 3D-printed hanging Christmas decoration, with a gold hanging string

Feet wiped. Ready for Christmas.

Cart

Spend $59 CAD more for free shipping.

Your cart is currently empty