Skip to content
Spooky Sale · 20% off selected products Sale ends in 19 October 2026 Shop the sale
Skip to product content

Christmas Gift Box Clicker Base (Two-Slot) New!

$9.28CAD
  • Colour:

  • Fast Shipping

  • Made in
    Australia

  • Hand-Finished & Inspected

  • Secure Checkout

  • We 3D-print our models in PLA, with wall and infill settings suited to each design.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to help protect it in transit.
  • Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Christmas Gift Box Clicker Base (Two-Slot)

Two-slot gift box bases holding present, snowman and elf keycaps
Another angle from Wiggly HQ

The full story

Two presents in one box, and both of them press.

A long gift box with the ribbon tied round the middle and a keycap opening on either side of the knot. Both openings hide a keyboard switch of their own, so the two caps go down separately: one for each hand, or one for you and one for whoever keeps reaching across the desk.

Put two of the same character side by side, or pair two who do not quite get along. Sprig and Jingle, for instance, have opinions about bows. Lay it flat on the desk or stand it on its end like a tall parcel.

Choose your favourite colour:

  • Red: red box, white ribbon. The classic.
  • White: white box, red ribbon. A lighter, snowier look.

See Them in Action

Why You'll Love the Two-Slot Gift Box

  • Two presses, one box: a separate Kailh Box clicky switch sits under each cap, so you can alternate or double-tap.
  • Made for pairs: two favourite characters, a matching set, or one Christmas cap beside one of your own.
  • Flat or upright: sits low beside the keyboard or stands tall on a shelf.
  • Ready out of the box: both switches come fitted, so it works as soon as the caps go on.
  • A thoughtful shared gift: fill both slots and it is a present for two people to fight over.

What You Get

  • 1 x Christmas Gift Box Clicker Base (Two-Slot) in your chosen colour, with 2 Kailh Box clicky switches fitted

Two presents. One argument about bows.

Note: keycaps are sold separately. Fits standard single-stem MX-compatible keycaps. Compatible keycaps press-fit onto the switches and remain removable, so you can swap them whenever you feel like a change.

Cart

Spend $59 CAD more for free shipping.

Your cart is currently empty