Skip to content
Black Friday · Up to 40% off selected · Ends 27 Nov
Black Friday Up to 40% off selected wiggly and clicky buddies Free shipping over $59 Shop the sale
Skip to product content
Two Tinker the Elf Boy figurines side by side on a blue background, one in a red onesie and one in striped socks and black shoes
Tinker the Elf Boy in the striped socks version, front view, sitting with big eyes and a red hat
A finger resting on the red hat of Tinker the Elf Boy in striped socks, sitting in an open hand
Tinker the Elf Boy in striped socks and black shoes, three-quarter view
Tinker the Elf Boy in striped socks, turned to the side with his legs stretched out
Tinker the Elf Boy in the red onesie version, front view
Tinker the Elf Boy in his red onesie, three-quarter view
Tinker the Elf Boy in his red onesie, seen from the side
Tinker the Elf Boy in his red onesie held by the hat between a finger and thumb

Tinker the Elf Boy New!

$10.24CAD $11.38 SAVE 10%

Dispatches in 2-4 business days

  • Title:

  • Fast Shipping

  • Made in
    Australia

  • Hand-Finished & Inspected

  • Secure Checkout

  • We 3D-print our models in PLA, with wall and infill settings suited to each design.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to help protect it in transit.
  • Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Printyboy

Dreamed up and wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Tinker the Elf Boy

Tinker the Elf Boy in the striped socks version, front view, sitting with big eyes and a red hat
Another angle from Wiggly HQ

The full story

Meet Tinker - an elf who is convinced the hallway light is watching him.

Tinker looks up and to the side whenever he is near it, because he has checked and nobody else ever has. Every morning he counts the dots on Biscuit and loses count at three, which he takes as proof that the counting is wrong, not him.

He is happy on a desk, a bookshelf or the edge of a Christmas display, and he makes an easy stocking filler or Kris Kringle gift for anyone who likes their small things to have opinions. He shares a sideboard with Biscuit and Walnut if you want to start a little hallway scene.

Choose your favourite Tinker:

  • Striped Socks: Tinker dressed for being looked at, with his legs stuck out so everyone notices the socks.
  • Onesie: Tinker after he gave up on the jacket. He has not changed since Tuesday and sees no problem with that.

Why You'll Love Tinker

  • Big personality, tiny elf: Huge eyes and a bobbled red hat make him instantly recognisable on a crowded shelf.
  • Two outfits, one elf: Pick the version that suits the person you are buying for, or keep both on the same shelf.
  • A gift that fits anywhere: Easy to tuck into a stocking, a Kris Kringle parcel or a card at the office.
  • Good desk company: He gives a monitor-side spot something to look up at.
  • Easy to build a scene: He sits happily beside Biscuit and Walnut.

What You Get

  • 1 x Tinker the Elf Boy 3D-printed figurine, in the version you choose

One elf. One light fitting. No proof he is wrong.

Cart

Spend $59 CAD more for free shipping.

Your cart is currently empty

Start with a favourite