Skip to content
Spooky Sale · 20% off selected products Sale ends in 19 October 2026 Shop the sale
Skip to product content

Keycap Clicker Base (Four-Slot)

$15.01CAD
  • Fast Shipping

  • Made in
    Australia

  • Hand-Finished & Inspected

  • Secure Checkout

  • We 3D-print our models in PLA, with wall and infill settings suited to each design.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to help protect it in transit.
  • Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Keycap Clicker Base (Four-Slot)

Plum four slot base Boltsy Spotto Lanty Fangy group front view.
Another angle from Wiggly HQ

The full story

Four switches, four caps, one block.

One cap is a fidget. Four together is a habit. Each slot has its own mechanical switch underneath, so you can move between all four or work the same one for ten minutes while you think about something else.

Four spaces also means four of our Halloween keycap characters get a room at once, which is the whole problem with a house of ten. Choose your four. Change them whenever you like.

Why You'll Love the Four-Slot Base

  • Four different ways to fidget: every slot has its own Kailh Box clicky switch, so each one presses independently of the others.
  • Move between four presses: The square layout keeps every switch within easy reach, whether you rotate around the set or return to the same favourite.
  • Four favourites on show at once: pick the four you like most and swap them out by hand whenever the lineup goes stale.
  • Mix ours with yours: the four slots take our characters and your own MX caps side by side.
  • Everything in one base: Four fitted switches keep the complete setup together in one block.

What You Get

  • 1 x Four Slot Keycap Clicker Base with 4 Kailh Box clicky switches fitted

Four rooms. Ten housemates. Good luck.

Note: keycaps are sold separately. Fits standard single-stem MX-compatible keycaps.

Cart

Spend $59 CAD more for free shipping.

Your cart is currently empty