Skip to content
Spooky Sale Β· 20% off selected products Sale ends in 19 October 2026 Shop the sale
Skip to product content

Ned the Penguin

Sale price $8.52NZD Regular price $10.65 SAVE 20%
Wiggle Intensity:
😐
Wiggle rating pending...
  • Free Shipping over $99 NZD

  • Made in
    Australia

  • Hand-Finished & Inspected

  • Secure Checkout

  • We 3D-print our models in PLA, with wall and infill settings suited to each design.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to help protect it in transit.
  • Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 Β°C (β‰ˆ 140 Β°F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Printyboy

Dreamed up and wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Ned the Penguin

Four penguin figurines arranged together, including Mabel, Walter, Ned and Dottie, on a blue background.
Another angle from Wiggly HQ

The full story

Meet Ned - he was only tidying up, apparently.

Ned Waddleton spots a fallen biscuit crumb before anybody else. His blue bow makes him look terribly proper, which is useful when he insists he was only tidying up beneath the breakfast table.

The family keep a seat for him, and he brings his own explanation. Give Ned a place beside your snack jar, or send him to the friend who somehow always finds the last biscuit.

Why You'll Love Ned

  • A little head wobble: Ned's head wobbles against the body when you give it a gentle nudge.
  • A small bit of mischief: a penguin with an innocent explanation ready for every stray crumb.
  • A cheeky desk companion: let Ned watch over the corner where the biscuits tend to disappear.
  • A gift for the usual suspect: choose him for the person who is always 'just tidying up' the last snack.
  • One more seat at breakfast: put him with Mabel, Walter and Dottie, or let him claim his own favourite spot.

What You Get

  • 1 x Ned Waddleton 3D-printed penguin figurine.

A good explanation goes a long way at breakfast.

Customer reviews

The humans have spoken

No reviews yet.

Cart

Spend $99 NZD more for free shipping.

Your cart is currently empty