Skip to content
Spooky Sale · 20% off selected products Sale ends in 19 October 2026 Shop the sale
Skip to product content

The Classics Keycap Set

$32.21NZD
  • Free Shipping over $99 NZD

  • Made in
    Australia

  • Hand-Finished & Inspected

  • Secure Checkout

  • We 3D-print our models in PLA, with wall and infill settings suited to each design.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to help protect it in transit.
  • Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at The Classics Keycap Set

Plum four slot keycap clicker base with switches front view.
Another angle from Wiggly HQ

The full story

Four rooms, four residents, and the four faces everybody recognises on sight.

A ghost, a reaper, a pumpkin and a Frankenstein, sitting in a four-slot base with a real mechanical switch under each one. No explaining required to anyone who walks past. This is Halloween on a desk in the most direct way we can manage it.

They all live at 4 Hollow Lane, a share house of ten with four rooms, which is exactly the problem this set solves. Wispy goes through walls. Grimsy laminated the chore roster. Lanty grew in the front garden and never formally moved in. Boltsy is made of spare parts and keeps finding his own left hand in the fridge.

Why You'll Love the Classics

  • Four separate buttons, not one: each slot has its own Kailh Box clicky switch, so you can roll a finger across all four or work the same one for ten minutes.
  • Nothing to buy afterwards: caps, base and all four switches arrive fitted and working together.
  • The set that needs no introduction: these are the four Halloween faces everyone knows, which makes it the easy one to give as a gift.
  • The complete classic crew: Four familiar Halloween faces arrive together in one ready-made clicker setup.
  • Room to grow: caps lift out by hand, so the six other residents can move in whenever you collect them.

What You Get

  • 1 x Four Slot Keycap Clicker Base with 4 Kailh Box clicky switches fitted
  • 1 x Wispy the Ghost 3D-printed keycap
  • 1 x Grimsy the Reaper 3D-printed keycap
  • 1 x Lanty the Pumpkin 3D-printed keycap
  • 1 x Boltsy the Frankenstein 3D-printed keycap

Four rooms. Ten housemates. These four got in first.

Cart

Spend $99 NZD more for free shipping.

Your cart is currently empty