Skip to content
Spooky Sale · 20% off selected products Sale ends in 19 October 2026 Shop the sale
Skip to product content

The Fin Club Shark Duo

Sale price $17.16NZD Regular price $21.46 SAVE 20%
Wiggle Intensity:
😐
Wiggle rating pending...
  • Free Shipping over $99 NZD

  • Made in
    Australia

  • Hand-Finished & Inspected

  • Secure Checkout

  • We 3D-print our models in PLA, with wall and infill settings suited to each design.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to help protect it in transit.
  • Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by MatMire Makes

Dreamed up in Colorado, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at The Fin Club Shark Duo

Grey 3D-printed great white shark fidget toy with a cheeky grin and white belly, curled in a hand.
Another angle from Wiggly HQ

The full story

Meet Toothy and Bonko - two grinning sharks who share one rock and have never quite seen eye to eye.

Toothy grins at absolutely everything. Bonko's eyes sit at either end of his hammer, so he has never once seen that grin head-on, and he is fairly sure Toothy is always smiling at someone just behind him. Neither of them has thought to check.

Together they make a desk crew with more charm than bite: two swishy tails, two cheerful faces, and one very ocean-shaped corner of your shelf. They are an easy gift for shark fans and a natural start to an Aquatic Creatures display.

Why You'll Love Toothy and Bonko

  • Two very different sharks: a classic great white grin beside a wonderfully odd hammerhead.
  • Made for fidgeting: both sharks are articulated, so their tails swish and wiggle in your hand.
  • A ready-made shark gift: the whole duo arrives together, no choosing required.
  • Friendly, not fierce: two big grins make a shark display that gets a laugh before it gets picked up.

What You Get

One rock, two grins, and a misunderstanding nobody is in a hurry to fix.

Cart

Spend $99 NZD more for free shipping.

Your cart is currently empty