Grey and black raccoon figurine crawling toward a toy milk crate with bottles

Close-up of the raccoon figurine's face and big eyes, standing on four legs

Rilo the Raccoon

$11.99

Choose an option:

Figurine + Milk Crate Kit

Figurine

Wiggle Intensity:

Wiggle rating pending...

Shipping paused — back soon

Order now — all orders start shipping from 10th August 2026.

Free Shipping over $59
Made in
Melbourne
Hand-Finished & Inspected
Secure Checkout

All our models are printed with multiple walls and increased infill using high-quality, non-toxic PLA for maximum strength and safety.
Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal -and make every piece uniquely yours.
Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
Each figurine is carefully packaged with protective packaging to ensure it arrives in perfect condition.
Please inspect your figurine upon arrival. If you have any concerns, contact us before leaving feedback.

Your Wiggly Stuff figures are built to last - with a little TLC!

Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Printyboy

Dreamed up and wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Rilo the Raccoon

Another angle from Wiggly HQ

Quick facts

At a glance

Approximate Product Dimensions (mm)

Option	Length	Width	Height
Figurine + Milk Crate Kit	70 mm	46 mm	35 mm
Figurine	70 mm	35 mm	35 mm

Quality & Process

All our models are printed with multiple walls and increased infill using high-quality, non-toxic PLA for maximum strength and safety.
Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal -and make every piece uniquely yours.
Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
Each figurine is carefully packaged with protective packaging to ensure it arrives in perfect condition.
Please inspect your figurine upon arrival. If you have any concerns, contact us before leaving feedback.

Product Care

Your Wiggly Stuff figures are built to last - with a little TLC!

Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

Safety

We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Printyboy

Dreamed up and wiggled into shape in Melbourne

The full story

Meet Rilo – your friendly neighbourhood milk thief. 🦝🥛

Those big eyes? Pure innocence. That striped tail? Perfect for sneaking. Rilo is a tiny raccoon with a tiny mission: acquire milk, look adorable, repeat. Pop him on your desk and watch your snacks mysteriously disappear (it was probably Rilo… probably).

Choose your vibe: the classic Standalone Rilo Figurine or the full caper-ready Milk Crate Kit with props for his late-night raids.

Why You’ll Love Rilo

Mini mischief: a pocket-sized bandit with maximum charm.
Scene ready: Milk Crate Kit turns any shelf into a tiny midnight heist.
Fidget-friendly: satisfyingly chonky and delightful to handle.
Melbourne-made: hand-finished using high-quality, eco-friendly PLA.

Choose Your Version

Standalone Figurine: 1 × Rilo the Raccoon — pure milk-thief energy.
Milk Crate Kit (Bundle): 1 × Rilo the Raccoon, 1 × yellow milk crate, 3 × mini milk bottles.

What You Get

Standalone: 1 × 3D-printed Rilo the Raccoon figurine
Milk Crate Kit: 1 × Rilo the Raccoon, 1 × yellow crate, 3 × milk bottles
Hand-finished in Melbourne for a clean, vibrant look

Adopt Rilo today — lock up your dairy and your heart. 🍼💛

Note: Rilo has shifted to a slightly darker grey than what is in the current photos