Skip to content
Spooky Sale · 20% off selected products Sale ends in 19 October 2026 Shop the sale
Skip to product content

Tannen the Christmas Tree Clicker New!

$12.49SGD
  • Fast Shipping

  • Made in
    Australia

  • Hand-Finished & Inspected

  • Secure Checkout

  • We 3D-print our models in PLA, with wall and infill settings suited to each design.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to help protect it in transit.
  • Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Tannen the Christmas Tree Clicker

Tannen the Christmas Tree Clicker three quarter view on a blue background
Another angle from Wiggly HQ

The full story

Meet Tannen - quite comfortable here, thanks. The decorations are staying.

Tannen found a good spot by the window and has no plans to leave. With a star on top and little boots underneath, this Christmas tree has somewhere to go but would much rather stay beside your keyboard.

Press from above and the leafy body dips towards the boots, then stands back up when you release. A cheerful desk companion, shelf decoration or stocking surprise for someone who keeps Christmas going a little longer.

Why You'll Love Tannen

  • A press with personality: Press down from the top to dip the tree towards the boots, then let it stand again.
  • Company for your keyboard: A character to keep close for little hands-busy breaks.
  • Christmas on the shelf: A cheerful display buddy between presses.
  • Easy to give: A playful stocking surprise for character collectors and clicker fans.

What You Get

  • 1 x Tannen the Christmas Tree Clicker 3D-printed character clicker with one fitted Kailh Box clicky switch

The decorations are staying. So is Tannen.

Cart

Spend $59 SGD more for free shipping.

Your cart is currently empty