Skip to content
Skip to product content

Chonktek Chamber New!

$39.99
  • Free Shipping over $59

  • Made in
    Melbourne

  • Hand-Finished & Inspected

  • Secure Checkout

  • We 3D-print our models in PLA, with wall and infill settings suited to each design.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to help protect it in transit.
  • Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by GoodChonk

Dreamed up and wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Chonktek Chamber

Chonktek chamber empty front view.
Another angle from Wiggly HQ

The full story

Give your Chonks a proper place to report for expedition duty.

The Chonktek Chamber is a chunky sci-fi display bay with bright white armour panels, a vivid red platform and its own front badge. Place one Chonk inside and it instantly looks like it has been assigned a private laboratory bunk.

It fits Chonks across the range, but feels especially at home with the strange specimens recovered during the Chonktek expedition. Pop N185 or Noot inside for a ready-made collector scene, or use it as a dramatic backdrop for whichever Chonk currently runs your desk.

Why You'll Love the Chonktek Chamber

  • Instant display upgrade: Turns a single Chonk into a complete sci-fi scene.
  • Fits the whole crew: Designed to accommodate Chonks from across the range.
  • Chonktek expedition styling: The clean armour panels and bold red platform suit the expedition specimens perfectly.
  • Ready to display: Supplied glued and fully assembled, with no construction required.
  • Serious shelf presence: The enclosed chamber gives your favourite Chonk a dedicated place to stand out.

What You Get

  • 1 x glued and assembled Chonktek Chamber 3D-printed display accessory

Every recovered specimen deserves a room of its own.

Cart

Spend $59 more for free shipping.

Your cart is currently empty