Skip to content
Skip to product content

Cobby the Corn Clicker New!

$12.99
  • Free Shipping over $59

  • Made in
    Melbourne

  • Hand-Finished & Inspected

  • Secure Checkout

  • All our models are printed with multiple walls and increased infill using high-quality, non-toxic PLA for maximum strength and safety.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal -and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to ensure it arrives in perfect condition.
  • Please inspect your figurine upon arrival. If you have any concerns, contact us before leaving feedback.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Cobby the Corn Clicker

Another angle from Wiggly HQ

The full story

Meet Cobby - a cob of corn on a stick with exactly one trick, fully committed.

Push the stick down and something inside him goes off like a kernel hitting hot oil: a sharp little pop with real weight behind it. Let go, it resets, and you will do it again. That is the arrangement, and he is comfortable with it.

Underneath the noise he is entirely relaxed - rounded rows of kernels, four stubby legs he shuffles about on, and two closed eyes suggesting he is not really following the conversation.

He belongs on a desk, in a pocket, or wherever your hands end up when you are thinking. He gets on fine with the rest of the clickers.

Why You'll Love It

  • Pops like a kernel: a proper keyboard switch inside, so the sound has weight and snap rather than a hollow plastic tap.
  • One more press: the reset is quick enough that stopping becomes a decision you keep postponing.
  • Legs that shuffle: the little feet move, so he can be repositioned mid-loiter.
  • Pocket-scaled: small enough to travel, sturdy enough to survive it.
  • Easy gifting: works for fidgeters, snack-food obsessives and anyone amused by corn with legs.

What You Get

  • 1 x Cobby the Corn Clicker with clicky switch fitted

Corn. On a stick. That pops. No further questions.

Cart

Spend $59 more for free shipping.

Your cart is currently empty