Skip to content
Skip to product content

Fangy the Vampire Keycap (Before Dinner) New!

$3.99
  • Free Shipping over $59

  • Made in
    Melbourne

  • Hand-Finished & Inspected

  • Secure Checkout

  • All our models are printed with multiple walls and increased infill using high-quality, non-toxic PLA for maximum strength and safety.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal -and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to ensure it arrives in perfect condition.
  • Please inspect your figurine upon arrival. If you have any concerns, contact us before leaving feedback.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Fangy the Vampire Keycap (Before Dinner)

Fangy the vampire before dinner keycap three quarter view.
Another angle from Wiggly HQ

The full story

Meet Fangy - green, hungry, and touchy about both.

This is Fangy before dinner. The green is what happens when a vampire leaves it too long, and he would rather you did not bring it up. He shares 4 Hollow Lane with nine others, including a paler, better fed version of himself who he insists is a completely different person. His post arrives addressed to both. He signs for both.

Standing him next to his After Dinner self on the same holder is the entire joke, and it only works if you have the two of them. On his own he is simply a vampire in a mood, which is also fine.

Why You'll Love It

  • Take it out on him: in a holder a real clicky switch sits under all that resentment, which feels like the correct use of a hungry vampire.
  • Half of a two-cap joke: add Fangy (After Dinner) and the pair does something neither one manages alone.
  • Mounts like any keycap: MX-style cross stem, tested on a Kailh Box switch.
  • A colour nothing else on your desk has: that sickly green sits oddly beside a normal keycap set, which is the point.
  • An affordable start to the pair: under four dollars each, so both of him costs less than eight.

What You Get

  • 1 x Fangy the Vampire (Before Dinner) 3D-printed keycap

He is fine. He does not want to talk about it.

Note: a keycap on its own does not click. It needs a mechanical switch to press against, either in one of our keycap holders or in your own keyboard. Caps are roughly 19 x 19mm across and between 16 and 19mm tall depending on the character, with an MX-style cross stem. Check your switch type and key spacing before ordering if you plan to use one on a keyboard.

Made to Swap

This keycap is designed to press-fit onto a compatible MX-style switch. We intentionally leave it unglued, so you can remove it and swap in another compatible keycap later.

Cart

Spend $59 more for free shipping.

Your cart is currently empty