N185 the Biohazard Nibs Variant New!

$11.54SGD

Fast Shipping
Made in
Australia
Hand-Finished & Inspected
Secure Checkout

Wiggle Intensity:

Wiggle rating pending...

Meet N185 - the biohazard Bug Beastchonk with a matte-black shell, electric green circuitry and absolutely nothing suspicious going on.

N185 has a low, heavily armoured body, chunky reactor-like tubes and bright green lines running across every segment. He looks less like an ordinary dragon and more like a restricted laboratory project that wandered away while nobody was watching.

His articulated body makes him a satisfying desk buddy, while that dramatic black-and-green finish gives him serious presence on a shelf or collector display.

N185 is a ChonkTek-enhanced variant of the original Nibs Bug Chonk Dragon, rebuilt with more technology, more attitude and considerably more warning-label energy. Find N185 and the rest of the documented dragon population in the ChonkDex.

Why You'll Love It

Unmistakable character: Electric green detailing makes the matte-black body stand out from every angle.
Satisfying movement: The long articulated body brings plenty of enjoyable desk-side wiggle.
Big Beastchonk presence: Chunky armour and reactor-like tubes make N185 a proper statement piece.
Wonderfully weird: A memorable gift for dragon collectors, bug fans and lovers of unusual creatures.
Part of the experiment: A technological reimagining of the original Nibs design.

What You Get

1 x N185 the Biohazard Nibs Variant articulated 3D-printed figurine

Functionally stable. Suspiciously bright. Probably fine.

Approximate Product Dimensions (mm)

Option	Length	Width	Height
N185 the Biohazard Nibs Variant	94 mm	24 mm	34 mm

All our models are printed with multiple walls and increased infill using high-quality, non-toxic PLA for maximum strength and safety.
Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal -and make every piece uniquely yours.
Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
Each figurine is carefully packaged with protective packaging to ensure it arrives in perfect condition.
Please inspect your figurine upon arrival. If you have any concerns, contact us before leaving feedback.

Your Wiggly Stuff figures are built to last - with a little TLC!

Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
Not food-safe and not intended for live animals or aquarium use.