Beansquatch Camping Set

Name: Beansquatch Camping Set
Brand: Wiggly Stuff
SKU: WS-BUN-016
Price: 19.0 USD
Availability: InStock

$19USD

Wiggle Intensity:

😐

Wiggle rating pending...

Shipping paused — back soon

Order now — all orders start shipping from 10th August 2026.

Fast Shipping
Made in
Australia
Hand-Finished & Inspected
Secure Checkout

All our models are printed with multiple walls and increased infill using high-quality, non-toxic PLA for maximum strength and safety.
Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal -and make every piece uniquely yours.
Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
Each figurine is carefully packaged with protective packaging to ensure it arrives in perfect condition.
Please inspect your figurine upon arrival. If you have any concerns, contact us before leaving feedback.

Your Wiggly Stuff figures are built to last - with a little TLC!

Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Printyboy

Dreamed up and wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Beansquatch Camping Set

Another angle from Wiggly HQ

Quick facts

At a glance

Approximate Product Dimensions (mm)

Product	Length	Width	Height
Camp Tree	33 mm	33 mm	59 mm
Camp Fire	18 mm	20 mm	17 mm
Beansquatch - Regular	34 mm	30 mm	40 mm
Beansquatch - Micro	21 mm	19 mm	24 mm

Quality & Process

All our models are printed with multiple walls and increased infill using high-quality, non-toxic PLA for maximum strength and safety.
Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal -and make every piece uniquely yours.
Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
Each figurine is carefully packaged with protective packaging to ensure it arrives in perfect condition.
Please inspect your figurine upon arrival. If you have any concerns, contact us before leaving feedback.

Product Care

Your Wiggly Stuff figures are built to last - with a little TLC!

Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

Safety

We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Printyboy

Dreamed up and wiggled into shape in Melbourne

The full story

Meet the Beansquatch Camping Set - a tiny woodland campsite scene starring your favourite bean-shaped Sasquatch.

This bundle is a complete little display world in one pack: a Regular Beansquatch, a Micro Beansquatch, two trees for the perfect “forest backdrop”, and a tiny campfire (firewood + flame) for maximum cosy vibes.

Pop it on your desk, style it on a shelf, or gift it to the cryptid-obsessed person in your life. Want more tiny legends to build out your world? Explore the LuckyBeans collection.

Why You’ll Love It

Instant scene in one set: everything you need for a cute mini campsite display.
Two Beansquatches included: Regular for main-character energy, Micro for tiny sidekick charm.
Easy to arrange: move the trees and campfire around to create your own little setup.
Best-value bundle: the easiest way to get the full “Beansquatch in the woods” moment.
Made in Melbourne: 3D-printed locally and finished with care.

What You Get

1 × Beansquatch figurine (Regular)
1 × Beansquatch figurine (Micro)
2 × Tree accessories
1 × Campfire accessory (firewood + flame)

Tiny forest scene. Big cryptid-camping energy.

Note: This collectible includes small parts and has glued-on features. Adult supervision is recommended, and it is not suitable for children under 3. If a glued-on piece comes loose, it can be carefully reattached with a small amount of craft glue. Not intended for live animals or aquarium use.