Potion Kit display set with bottles, cups, red mixing bowl and spoon on a wooden-look serving plate, front view

360° render

Potion Kit laid out on its serving plate, overhead view

Potion Kit purple, green and blue potion bottles behind the mixing bowl, low front view

Hand stirring the Potion Kit spoon in the red mixing bowl

Hand tipping the green poison bottle over the mixing bowl

Hand placing a cork in the blue healing bottle

Purple witch cup from the Potion Kit held in hand

Close-up of the Potion Kit spoon beside the candle cup

Close-up of the green, purple, blue and candle cups around the mixing bowl

Potion Kit New!

$39.99

Free Shipping over $59
Made in
Melbourne
Hand-Finished & Inspected
Secure Checkout

We 3D-print our models in PLA, with wall and infill settings suited to each design.
Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
Each figurine is carefully packaged with protective packaging to help protect it in transit.
Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by GoodChonk

Dreamed up and wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Potion Kit

Another angle from Wiggly HQ

Quick facts

At a glance

Approximate Product Dimensions (mm)

Option	Length	Width	Height
Potion Kit	225 mm	226 mm	120 mm

Quality & Process

We 3D-print our models in PLA, with wall and infill settings suited to each design.
Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
Each figurine is carefully packaged with protective packaging to help protect it in transit.
Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Product Care

Your Wiggly Stuff figures are built to last - with a little TLC!

Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

Safety

We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by GoodChonk

Dreamed up and wiggled into shape in Melbourne

The full story

A whole witch's potion corner, built at Chonk size.

Three stoppered bottles - a purple witch's brew, a green poison that is probably fine and a blue healing tonic - each come with a matching cup. Add a candle cup, a red mixing bowl with its own spoon and a big serving plate to set it all out on, and any shelf becomes a spooky little potion shop.

Every piece is separate, so you can rearrange the scene as often as you like - lined up on the plate, scattered mid-brew or gathered around your favourite Chonk.

Find more ways to set up a Chonk display in our Chonk Habitat Supplies, or build a full spooky scene from the Halloween collection.

Why You'll Love the Potion Kit

A complete scene in one go: Bottles, cups, bowl, spoon and plate - everything a tiny potion shop needs.
Made for Chonk displays: Chunky, rounded pieces in the same playful style as the Chonks themselves.
Rearrange any time: Separate pieces mean a new display whenever the mood strikes.
Halloween display ready: Instantly gives a shelf of Chonks a spooky storyline.
A collector's gift: The easiest way to give a Chonk fan something new for the whole crew.