Skip to content
Skip to product content

Wispy the Ghost Keycap New!

$4USD
  • Fast Shipping

  • Made in
    Australia

  • Hand-Finished & Inspected

  • Secure Checkout

  • All our models are printed with multiple walls and increased infill using high-quality, non-toxic PLA for maximum strength and safety.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal -and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to ensure it arrives in perfect condition.
  • Please inspect your figurine upon arrival. If you have any concerns, contact us before leaving feedback.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Wispy the Ghost Keycap

Wispy the beige ghost keycap three quarter view.
Another angle from Wiggly HQ

The full story

Meet Wispy - the housemate who has never once used a door.

Wispy goes through walls instead, which the rest of 4 Hollow Lane finds rude rather than impressive. He still knocks on the bathroom door out of habit, then forgets halfway through and comes in anyway. Soft beige, permanently a bit worried, and the palest face in the house.

Being a keycap gives him two lives. Sit him in one of our holders and he becomes a small desk button you can press all day. Push him onto a mechanical switch of your own and he takes over a key you actually use.

Why You'll Love It

  • A small reward for a stuck moment: in a holder he sits over a real clicky switch, and pressing a ghost on the head is a good way to unstick a sentence.
  • Or use your own switch: MX-style cross stem, tested here on a Kailh Box.
  • Stands out on a dark desk: pale beige against black keycaps and dark timber, so he is easy to pick out without looking down.
  • Costs less than a coffee: an easy add to any order, with nine housemates at the same address.
  • Gifts without wrapping: small enough to drop into a stocking or tuck into a parcel as a bonus.

What You Get

  • 1 x Wispy the Ghost 3D-printed keycap

Knocks first. Comes through the wall anyway.

Note: a keycap on its own does not click. It needs a mechanical switch to press against, either in one of our keycap holders or in your own keyboard. Caps are roughly 19 x 19mm across and between 16 and 19mm tall depending on the character, with an MX-style cross stem. Check your switch type and key spacing before ordering if you plan to use one on a keyboard.

Made to Swap

This keycap is designed to press-fit onto a compatible MX-style switch. We intentionally leave it unglued, so you can remove it and swap in another compatible keycap later.

Cart

Spend $59 USD more for free shipping.

Your cart is currently empty