Skip to content
Spooky Sale · 20% off selected products Sale ends in 19 October 2026 Shop the sale
Skip to product content

Bowsy the Red Present Keycap New!

$3.99
  • Free Shipping over $59

  • Made in
    Melbourne

  • Hand-Finished & Inspected

  • Secure Checkout

Build a clicker with Bowsy Pick a base, fill the slots, add a keyring if it's coming along.
  • We 3D-print our models in PLA, with wall and infill settings suited to each design.
  • Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
  • Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
  • Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
  • Each figurine is carefully packaged with protective packaging to help protect it in transit.
  • Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

  • Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
  • Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
  • No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
  • Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
  • Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
  • Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.
  • We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
  • Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
  • ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
  • Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Bowsy the Red Present Keycap

Bowsy the red present Christmas keycap, angled view
Another angle from Wiggly HQ

The full story

Meet Bowsy - the present everyone picks up and shakes.

Every visitor who walks past the tree picks Bowsy up and gives him a shake to guess what is inside. Around the sixth guess he started rattling on purpose, just to keep it going. He is the reddest thing under the tree, the yellow bow is always perfectly tied, and so far he has told nobody what is in there.

In one of our gift box clicker bases, every press is a little shake of the present, and he answers each one with a knock. On a keyboard of your own he turns an ordinary key into the reddest thing on the desk.

See Them in Action

Why You'll Love Bowsy

  • The present everyone recognises: red with a yellow bow reads as Christmas from across the room, no explaining needed.
  • Go on, give him a shake: in a gift box base he knocks back at you every time, like something small rattling about inside.
  • Fits your keyboard too: MX-style cross stem, tested here on a Kailh Box.
  • An easy Kris Kringle pick: small, cheerful and very hard to get wrong as a gift.
  • Swaps in seconds: he pulls off his switch by hand, so a different present can take a turn on top.

What You Get

  • 1 x Bowsy the Red Present 3D-printed keycap

Still not telling you what is inside.

Note: a keycap on its own does not click. It needs a mechanical switch to press against, either in one of our clicker bases or in your own keyboard. Caps are roughly 19 x 19mm across and between 16 and 19mm tall depending on the character, with an MX-style cross stem. Check your switch type and key spacing before ordering if you plan to use one on a keyboard. The cap press-fits onto a compatible switch and is intentionally left unglued so it can be removed or swapped.

Cart

Spend $59 more for free shipping.

Your cart is currently empty