Red four-slot gift box clicker base filled with Christmas pudding, elf, snowman and Santa puppy keycaps

White four-slot gift box clicker base filled with four present keycaps

White four-slot gift box base with present keycaps, front view

Four-slot and two-slot gift box clicker bases side by side, filled with Christmas keycaps

Empty red four-slot gift box clicker base with a white ribbon, front view

Empty red four-slot gift box clicker base, angled view

Empty red four-slot gift box clicker base from above, showing the four sockets

Red four-slot gift box base with four clicky switches fitted

Red four-slot gift box base with switches, front view

Red four-slot gift box base with switches, seen from above

Red four-slot gift box base with switches, held in a hand

Empty white four-slot gift box clicker base with a red ribbon, front view

Empty white four-slot gift box clicker base, angled view

Empty white four-slot gift box clicker base from above

White four-slot gift box base with four clicky switches fitted

White four-slot gift box base with switches, front view

White four-slot gift box base with switches, seen from above

White four-slot gift box base with switches, held in a hand

Empty white four-slot gift box base held in a hand

Christmas Gift Box Clicker Base (Four-Slot) New!

$12.99

Colour:

Red

White

Free Shipping over $59
Made in
Melbourne
Hand-Finished & Inspected
Secure Checkout

We 3D-print our models in PLA, with wall and infill settings suited to each design.
Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
Each figurine is carefully packaged with protective packaging to help protect it in transit.
Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

Meet the wiggly details

A closer look at Christmas Gift Box Clicker Base (Four-Slot)

Another angle from Wiggly HQ

Quick facts

At a glance

Approximate Product Dimensions (mm)

Option	Length	Width	Height
Red	49 mm	54 mm	20 mm
White	49 mm	54 mm	20 mm

Quality & Process

We 3D-print our models in PLA, with wall and infill settings suited to each design.
Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
Each figurine is carefully packaged with protective packaging to help protect it in transit.
Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Product Care

Your Wiggly Stuff figures are built to last - with a little TLC!

Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

Safety

We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
Not food-safe and not intended for live animals or aquarium use.

Licensed Seller – Model by Puffy Puff

Dreamed up in London, wiggled into shape in Melbourne

The full story

A whole Christmas morning in one little box.

A square gift box with the ribbon crossed over the top and a keycap opening in each of its four corners. Every corner has a keyboard switch tucked beneath it, so fill it with four presents, four characters or a mix, and every corner of Christmas clicks back when pressed.

It is the closest thing to the big gift box under the tree that our eight Christmas keycaps share, and it fits half of them at once. Choose your four, swap them whenever you like, and keep the rest on standby for Boxing Day.

Choose your favourite colour:

Red: red box, white ribbon. The classic.
White: white box, red ribbon. A lighter, snowier look.

See It in Action

Why You'll Love the Four-Slot Gift Box

Four separate presses: four Kailh Box clicky switches, one under every cap, so each corner works on its own.
Room for a crowd: half the Christmas box on show together, close enough to tap one after another.
The full gift box look: filled with Christmas caps, it looks like a box of presents on the desk.
Any MX-style cap fits: Christmas characters, Halloween housemates or caps from your own collection, in any mix.
The big gift: fill all four slots and it is a complete Christmas present in one go.

What You Get

1 x Christmas Gift Box Clicker Base (Four-Slot) in your chosen colour, with 4 Kailh Box clicky switches fitted

Four seats. Eight applicants. It's Christmas, be nice.

Note: keycaps are sold separately. Fits standard single-stem MX-compatible keycaps. Compatible keycaps press-fit onto the switches and remain removable, so you can swap them whenever you feel like a change.