Build Your Own Christmas Clicker

• Your lineup, your way: Mix different characters or repeat a favourite in every slot.
• A switch under every slot: Each slot has its own Kailh Box switch, so every cap presses on its own.
• Easy to change later: Swap the caps by hand whenever the lineup needs a shake-up.
• Ready to come along: Add a chain, keyring or wrist strap so it can ride on a bag, keys or wrist.

• 1 x 3D-printed clicker base of your choice, with a Kailh Box switch under every slot
• 1 x 3D-printed character keycap for each slot on your base
• Optional: 1 x carry attachment (ball chain, silver split ring, lobster-clip keyring or braided wrist strap)

Each piece is added to your cart separately and grouped together as one build. Random-colour attachments are picked from the available mix.

• We 3D-print our models in PLA, with wall and infill settings suited to each design.
• Each Wiggly Stuff figurine is 3D-printed and hand-finished, so slight imperfections, visible layer lines, colour shifts in the filament, and tiny variations are normal - and make every piece uniquely yours.
• Gradient and rainbow colour patterns occur randomly and may vary from batch to batch.
• Actual filament colours may vary slightly from what you see on screen due to dye-lot differences and monitor settings.
• Each figurine is carefully packaged with protective packaging to help protect it in transit.
• Please inspect your figurine on arrival. If you have any concerns, contact us and we’ll help.

Your Wiggly Stuff figures are built to last - with a little TLC!

• Keep cool: PLA softens above ~60 °C (≈ 140 °F). Avoid leaving your figurine in direct sun, inside hot cars, or near heaters.
• Gentle cleaning only: Rinse under lukewarm, soapy water. Use a soft brush or toothpick to clear any dust or debris from tight spots.
• No dishwashers or ovens: High heat or harsh detergents can warp or weaken the plastic.
• Handle with care: These figures are flexible but not indestructible. Don’t bend or twist parts beyond their normal range, and avoid strong lateral pressure.
• Glued parts: Some figures may include glued parts or small attached pieces. If a piece loosens or detaches, it can usually be reattached with a small amount of standard super glue. Let the glue fully dry before handling again.
• Display tip: For best colour retention, keep your figure out of prolonged UV exposure - indoors on a shelf or in a display case is ideal.

• We do our absolute best to ensure our prints are free from sharp edges, but minor imperfections may occur - please inspect each piece before handling them.
• Some items may contain glued parts or small attached pieces. These may loosen or detach if dropped, bent, chewed, pulled, or handled roughly.
• ⚠️ Choking Hazard: Wiggly Stuff figurines contain small parts and are not suitable for children under 3 years. Always supervise young children during play and use your discretion when gifting these items.
• Not food-safe and not intended for live animals or aquarium use.